Lathe Machine DL 450 X 1000
- Product Code: Lathe Machine DL 450 X 1000
- Availability: In Stock
|DALJIT ALL GEAR BENCH LATHE MACHINE|
|Model||DL- 450 X 1000||DL- 450X 1200||DL- 450 X 1500|
|Bed Length||1800 mm||2100 mm||2400 mm|
|Admit Between Center||1000 mm||1200 mm||1500 mm|
|Center Height||225 mm||225 mm||225 mm|
|Bed Width||280 mm||280 mm||280 mm|
|Swing Over Bed||450 mm||450 mm||450 mm|
|Swing Over Cross Slide||225 mm||225 mm||225 mm|
|Spindle Type||MT – 4||MT – 4||MT -4|
|Spindle Bore||40 mm||40 mm||40 mm|
|No. of Spindle Speed||8||8||8|
Bed is made from 25 Grade Cast lron of 400 BHN hardened, strictly inspected with Microlevel, Hardness Tester and Straight Edge.
Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel.
Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
HEAD STOCK is totally enclosed oil bath system & gear made from EN-9 Hardened
Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal grinding.
Instruction Manual as per indian Standard IS – 1878 (part -I) 1971.
COLOUR OPTION AVALIBLE
Main Motor, Starter , Change Gear Set ( Inch & mm ), Chuck Plate , Tool Post Ley ,
Four Position Tool Post ,Center Adopter , Dead Center ( 2 Nos. )
Product video not available !
|H.P Required||1.5 kw / 2 HP|
|Length of bed||1800 mm|
|Spinder Taper||MT- 4|
|Height of Center||200 mm / 225 mm / 250 mm|
|Distance Between Center||1000 mm|
|Swing Over Bed||450 mm|
|Swing Over Cross Slide||225 mm|
|Width of Bed||280 mm|
|Hole through Spindle||40 mm|
|No. Of Spindle Speeds||8|