Lathe Machine DL 500 X 1000
- Product Code: Lathe Machine DL 500 X 1000
- Availability: In Stock
|DALJIT ALL GEAR BENCH LATHE MACHINE|
|Model||DL- 500 X 1000||DL- 500 X 1200||DL- 500 X 1500|
|Bed Length||1800 mm||2100 mm||2400 mm|
|Admit Between Center||1000 mm||1200 mm||1500 mm|
|Center Height||250 mm||250 mm||250 mm|
|Bed Width||280 mm||280 mm||280 mm|
|Swing Over Bed||500 mm||500 mm||500 mm|
|Swing Over Cross Slide||250 mm||250 mm||250 mm|
|Spindle Type||MT – 4||MT – 4||MT -4|
|Spindle Bore||50 mm||50 mm||50 mm|
|No. of Spindle Speed||8||8||8|
Bed is made from 25 Grade Cast lron of 400 BHN hardened, strictly inspected with Microlevel, Hardness Tester and Straight Edge.
Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel.
Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
HEAD STOCK is totally enclosed oil bath system & gear made from EN-9 Hardened
Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal grinding.
Instruction Manual as per indian Standard IS – 1878 (part -I) 1971.
COLOUR OPTION AVALIBLE
Main Motor, Starter , Change Gear Set ( Inch & mm ), Chuck Plate , Tool Post Ley ,
Four Position Tool Post ,Center Adopter , Dead Center ( 2 Nos. )
Product video not available !
|Length of bed||2100 MM|
|Spinder Taper||MT- 4|
|Height of Center||250 MM|
|Distance Between Center||1200 MM|
|Swing Over Bed||500 MM|
|Swing Over Cross Slide||250 MM|
|Width of Bed||280 MM|
|Hole through Spindle||50 MM|
|No. Of Spindle Speeds||8|
|H.P Required||3 HP|